Hot melt glue machine requirements for hot melt glue is not very high, as long as it is hot melt glue, basically can be used. However, in order to bond the effect, it is necessary to choose the right hot melt adhesive machine and hot melt adhesive. In the absence of professional tools, it is also possible to identify the quality of hot melt adhesive to a certain extent.
Quick identification of hot melt adhesive methods:
1. Carefully observe whether there are bubbles and impurities in the appearance of hot melt adhesive.
2. Identify by smell. Pungent smell means more filling or unqualified raw materials.
3. Squeeze by hand to feel the flexibility of hot melt adhesive.
4. Melt the hot melt adhesive to make a 2mm thick tape and stretch it to see if the tensile force meets the basic standard. 5. Put the hot melt adhesive in an environment below 0 degrees Celsius, take it out after 24 hours, and knock the fracture phenomenon indicates poor low temperature resistance; Put the hot melt glue in an environment higher than 40 degrees Celsius, take it out after 24 hours, if there is soft, self-adhesive phenomenon, that the softening point of gelatin is low.
Machine Model | S5 |
power supply | AC50HZ/220V |
Total power | 2KW |
motor power | 120W-200W |
machine dimension | 690*400*470mm |
machine weight | 58kg |
melter tank capacity | 5L |
glue melting speed | 8kg/h |
operating temperature | MAX 220 Deg. C. |
applicable viscosity | 500-20000CPS |
temperature accuracy | ±1 Deg. C. |
glue guns outputs | 1-4 guns |
