| Quantity: | |
|---|---|
shengsai
The working principle of the winder is mainly to wind up the material through the rotation of the scroll, and adjust the tension during the winding process through the tension control system to ensure the quality and tightness of the coil.
In the winding process, the material usually goes through a series of treatment steps, such as unwinding, gluing, curing, etc., to meet different process requirements. Specifically, the working principle of the winder includes the following aspects:
1. Winding: The material is released from the winding machine and enters the winding machine through the roller.
2. Gluing: In the gluing device, the surface of the gluing roller is slotted, and the glue material is evenly coated on the edge of the material.
3. Curing: After the rapid curing furnace, the rubber material is cured, so that it is firmly combined with the material.
4. Winding: The winding roller is driven by a motor and winds the material on the reel. The tension control system will adjust the winding tension according to the characteristics of the material and the process requirements to ensure that the coil is smooth and tight.
5. Control system: The winding machine is usually equipped with a control system, which is used to control the speed of the scroll, the size of the tension and other parameters to achieve automatic winding process.
In short, the working principle of the winder is to wind the material into a roll by mechanical and electrical means, and to ensure that the quality and specifications of the roll meet the requirements.
