Views: 0 Author: Site Editor Publish Time: 2024-02-06 Origin: Site
I. Production line configuration
Pay-off stand, braid machine, silicone extruder, vulcanization and drying track, traction device, take-up and arranging line stand, etc
2. Silicone rubber extruder (φ30, 50, 65, 90)
National patented products, rubber machinery testing and verification center testing and verification
Optimized compression ratio, length-diameter ratio designed for silica gel characteristics
The front part of the screw is provided with a filter plate, which greatly improves the uniformity and fluidity of the rubber material and reduces the impurities of the rubber material
Stepless speed regulation, the use of Japan imported inverter, frequency conversion motor
The screw adopts floating design, which can easily disassemble and clean the screw barrel, and is suitable for frequently changing the color of the rubber material
The barrel and the cooling water tank are integrated, and the operating temperature is below 40 degrees
It is equipped with a feed roller that rotates synchronously with the screw to achieve uniform feed and reliable feed
Can be matched with two-color composite extruder head,
3. High efficiency hot air curing baking path (6-10 meters)
The whole baking road is divided into four sections, each section can be individually controlled temperature
Working temperature 250-600 degrees high temperature fast vulcanization, high production efficiency
Automatic constant temperature control, control instrument digital display, simple and reliable operation
The inside and outside of the drying road are covered with stainless steel sheet, clean and sanitary, and there is no pollution to the cable
The drying path is an open structure, easy to use and maintain
