Availability: | |
---|---|
Quantity: | |
Hot Melt Glue Machine Guns Details:
1. Adopt imported bowl seal ring
2. Import heating pipe
3. Aviation plug AMP
4. made of SKD51 material
Please contact us for more detailed information
Hot melt glue guns may vary in appearance or size depending on brand and power, but the method of use is much the same. Prepare the hot melt glue and the glue gun. Insert either end of the hot melt glue strip into the glue gun until the end. After inserting the rubber strip, power on the hot melt glue gun, and then turn on the hot melt glue gun switch. The general switch is in the handshake position. When opened, the indicator light will light up.
Open the support of the hot melt glue gun and place it on a flat surface. Wait for about 3-5 minutes for the glue gun to be preheated. If the temperature does not reach the standard requirements, the glue can not be smoothly produced, so we need to preheat the glue gun and then align the glue outlet position with the item that needs to be glued. Press the switch to use normally. The operation mode is actually very simple, after bonding, the switch is turned off, and the power plug can be unplugged. Just note that the metal reissue temperature of the glue gun is relatively high, and can not be touched by hand during operation to avoid burns. Do not take out the glue stick inserted in the electric melt glue gun, and can be used directly next time.
content is empty!