Views: 0 Author: Site Editor Publish Time: 2024-06-04 Origin: Site
The workflow of the hot melt glue machine usually includes the following steps:
1. Heating: First, plug the hot melt glue machine into the power supply and turn on the switch to let the machine start heating. There is a heater inside the hot melt glue machine, which can heat the solid strip to a melting state.
2. Melting: When the rubber strip is completely melted, push the melted rubber strip to the nozzle or coating head through the pressure system inside the hot melt machine.
3. Apply: Place the object that needs to be applied or filled with hot melt glue on the work table, point the nozzle or coating head of the hot melt glue machine at the object, and begin to apply or fill the hot melt glue.
4. Curing: After the hot melt adhesive is coated or filled in place, wait for the hot melt adhesive to cool and cure naturally, or you can use the cooling system to accelerate curing.
5. Cleaning: After the work is completed, turn off the power of the hot melt glue machine, wait for the machine to cool down and clean the inside of the machine and the nozzle to maintain the normal working state of the machine.
